PROTOTYPE OF TEMPERATURE AND HUMIDITY CONTROL AND MONITORING SYSTEM PROTOTYPE IN CUBICLE

Atmaja, Maya Dzatir Rosidah Yisri (2022) PROTOTYPE OF TEMPERATURE AND HUMIDITY CONTROL AND MONITORING SYSTEM PROTOTYPE IN CUBICLE. Tugas Akhir thesis, University of Technology.

[img] Text
5180711100_Maya Dzatir Rosidah Yisri Atmadja.pdf
Download (141kB)

Abstract

ABSTRACT Each cubicle is of course equipped with a supporting component in the form of a heater, however, sometimes the heater is in a condition where the temperature rises due to a large load or current cannot help, instead the heat released by the heater causes an increase in the level of saturated water vapor in the air in the cubicle. The cubicle on the customer's side has the potential for disruption due to lack of maintenance, so a tool that can monitor and control temperature and humidity is needed in real time. The DHT22 sensor is used to measure temperature and humidity, when the temperature is above 35℃ the fan is active and will turn off when it hits 33℃. At humidity above 55% the heater is active and will turn off after the humidity reaches 45%. Based on the tests that have been carried out, it is known that the error accuracy value at the temperature value is 98.98% and humidity is 98.3%, the system can work well with a 100% system success presentation, with an average temperature reduction time of 1.89 seconds. and the average humidity reduction time is 1.37 seconds. From the tests that have been carried out, the tool is able to control temperature and humidity well and the results can be monitored through the Blynk IoT application which can be in the form of notifications. Keywords : 20 kV cubicle, temperature, humidity, IoT, DHT22

Item Type: Thesis (Skripsi, Tugas Akhir or Kerja Praktek) (Tugas Akhir)
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions: Fakultas Sains Dan Teknologi > S1 Teknik Elektro
Depositing User: Kaprodi Teknik Elektro
Date Deposited: 06 Oct 2022 03:13
Last Modified: 06 Oct 2022 03:13
URI: http://eprints.uty.ac.id/id/eprint/10578

Actions (login required)

View Item View Item
UTY Open Access is powered by EPrints 3 which is developed by the School of Electronics and Computer Science at the University of Southampton. More information and software credits.