PERANCANGAN TATA LETAK GUDANG PLAT MENGGUNAKAN METODE DEDICATED STORAGE DAN CLASS-BASED STORAGE DI PT MEGA ANDALAN KOMPONEN LOGAM LAYOUT DESIGN OF PLATE WAREHOUSE USING DEDICATED STORAGE AND CLASS-BASED STORAGE METHODS AT PT MEGA ANDALAN KOMPONEN LOGAM

Aisyah, Siti and Setiafindari, Widya (2023) PERANCANGAN TATA LETAK GUDANG PLAT MENGGUNAKAN METODE DEDICATED STORAGE DAN CLASS-BASED STORAGE DI PT MEGA ANDALAN KOMPONEN LOGAM LAYOUT DESIGN OF PLATE WAREHOUSE USING DEDICATED STORAGE AND CLASS-BASED STORAGE METHODS AT PT MEGA ANDALAN KOMPONEN LOGAM. ["eprint_fieldopt_thesis_type_tugasakhir" not defined] thesis, University of Technology Yogyakarta.

Text 5190611110 SITI AISYAH-ABSTRAK.pdf Download (149kB)

Abstract

ABSTRAK PT Mega Andalan Komponen Logam (MAKL) adalah perusahaan yang memproduksi komponen alat rumah sakit dengan bahan plat, pipa, dan as. Permasalahan yang terjadi pada gudang plat yaitu tidak adanya susunan produk yang permanen, lokasi penyimpanan menjadi sempit karena produk diletakkan secara acak di lantai gudang, tidak ada kode produk sebagai penanda pada rak sehingga karyawan seringkali kesulitan dalam mencari plat, dan terdapat jarak tambahan sebesar 10-15 meter karena adanya aktivitas bolak-balik mencari produk. Tujuan penelitian ini adalah merancang susunan kode plat pada rak dan layout usulan untuk mengatur posisi penyimpanan. Usulan susunan plat menggunakan metode dedicated storage diurutkan dari nilai T/S tertinggi dekat area pintu masuk dan keluar gudang. Urutan plat pada rak yaitu dimulai dari kode K,F,A,J,E,D,C, dan B. Usulan penyimpanan plat menggunakan metode class-based storage diatur berdasarkan perbandingan nilai throughput. Urutan plat pada rak 1 yaitu kode J,K, dan F, rak 2 kode B, rak 3 kode E, rak 4 kode D, rak 5 kode C, dan rak 6 kode A. Layout usulan yang memiliki hasil terbaik dibandingkan layout awal adalah metode class-based storage ditunjukkan dengan adanya penurunan sebesar 25% dari jarak tempuh awal 117 meter dan total jarak setelah dilakukan perbaikan 99,6 meter pengurangan sebesar 17,4 meter. Kata kunci: class-based storage, dedicated storage, gudang, susunan ABSTRACT PT Mega Andalan Komponen Logam (MAKL) is a company that produces components for hospital equipment with plate, pipe and axle materials. The problems that occur in the plate warehouse are that there is no permanent product arrangement, the storage location is narrow because the products are placed randomly on the warehouse floor, there is no product code as a marker on the shelf so that employees often have difficulty finding plates, and there is an additional distance of 10- 15 meters due to the activity back and forth looking for products. The purpose of this research is to design a plate code arrangement on a shelf and a proposed layout for arranging storage positions. The proposed plate arrangement using the dedicated storage method is sorted from the highest T/S value near the entrance and exit areas of the warehouse. The order of the plates on the rack starts from the code K, F, A, J, E, D, C, and B. The proposed storage of plates using the class-based storage method is arranged based on the ratio of throughput values. The order of plates on rack 1 is coded J, K, and F, rack 2 is coded B, rack 3 is coded E, rack 4 is coded D, rack 5 is coded C, and rack 6 is coded A. The proposed layout which has the best results compared to the initial layout is The class-based storage method is shown by a 25% decrease from the initial distance of 117 meters and the total distance after repairs of 99.6 meters is a reduction of 17.4 meters. Keywords: class-based storage, dedicated storage, warehouse, arrangement

Item Type:	Thesis (["eprint_fieldopt_thesis_type_tugasakhir" not defined])
Subjects:	T Technology > TS Manufactures
Divisions:	Fakultas Sains dan Teknologi > S1 Teknik Industri
Depositing User:	Kaprodi S1 Teknik Industri UTY
Date Deposited:	27 Jul 2023 02:46
Last Modified:	27 Jul 2023 02:46
URI:	http://eprints.uty.ac.id/id/eprint/13255

Actions (login required)

View Item