 | Up a level |
Ramadhan, Ari and Budianto, Johan (2022) ANALISIS PERBANDINGAN GAYA GEMPA PADA GEDUNG THE MANOHARA HOTEL BERDASARKAN ANALISIS DINAMIK RESPON SPEKTRUM DAN TIME HISTORY COMPARISONAL ANALYSIS OF EARTHQUAKE FORCES IN MANOHARA HOTEL BUILDING BASED ON SPECTRUM RESPONSE DYNAMICS ANALYSIS AND TIME HISTORY. Tugas Akhir thesis, University Technology Yogyakarta.
Ahmad, Naufal Arif and Budianto, Johan (2022) EVALUASI STRUKTUR DENGAN PUSHOVER ANALYSIS RUMAH SUSUN KENDAL DENGAN METODE FEMA 440 DAN ATC 40 STRUCTURE EVALUATION WITH PUSHOVER ANALYSIS OF KENDAL FLAT WITH FEMA 440 AND ATC 40 METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Hidayat, Dwi Rahmat and Budianto, Johan (2022) ANALISIS KINERJA SEISMIK STRUKTUR RANGKA PEMIKUL MOMEN KHUSUS MENGGUNAKAN METODE PUSHOVER ANALYSIS (Studi Kasus: Proyek Pekerjaan Fisik Gedung Inspektorat D.I. Yogyakarta) SEISMIC PERFORMANCE ANALYSIS OF SPECIAL MOMENT RESISTANCE FRAME STRUCTURES USING PUSHOVER ANALYSIS METHOD (Case Study: Physical Work Project of the Yogyakarta D.I. Inspectorate Building). Tugas Akhir thesis, University Technology Yogyakarta.
Mamantriono. YF, Mamantriono. YF and Budianto, Johan (2022) CEK DESAIN BANGUNAN TEKNIK SIPIL MENGGUNAKAN METODE BUILDING INFORMATION MODELLING (BIM) Studi Kasus: Gedung Baru Pengadilan Agama Malili CHECKING CIVIL ENGINEERING BUILDING DESIGN USING BUILDING INFORMATION MODELLING (BIM) METHOD Case Study: New Malili Religious Court Building. Tugas Akhir thesis, University Technology Yogyakarta.
Herwanto, Putut and Budianto, Johan (2022) EVALUASI KINERJA STRUKTUR BANGUNAN GEDUNG INSTALASI GAWAT DARURAT RSUD PANEMBAHAN SENOPATI DENGAN METODE FEMA 440 DAN ATC 40 EVALUATION OF STRUCTURE PERFORMANCE OF THE EMERGENCY INSTALLATION BUILDING PANEMBAHAN SENOPATI HOSPITAL USING FEMA 440 AND ATC 40 METHODS. Tugas Akhir thesis, University Technology Yogyakarta.
Jimmy, Jimmy and Budianto, Johan (2022) PERBANDINGAN DESIGN GEDUNG PENGADILAN AGAMA MALILI PADA BETON DAN GEMPA DENGAN METODE BUILDING INFORMATION MODELLING (BIM) COMPARISON OF MALILI RELIGIOUS COURT BUILDING DESIGN IN CONCRETE AND EARTHQUAKE WITH BUILDING INFORMATION MODELLING (BIM) METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Tuka, Apolynaris James and Budianto, Johan (2022) PERENCANAAN ULANG BETON GEDUNG PERPUSTAKAAN dan AUDITORIUM UNIVERSITAS SULAWESI BARAT DENGAN MENGGUNAKAN SNI 1726:2019 dan SNI 2847:2019 CONCRETE REDESIGN OF THE UNIVERSITY OF WEST SULAWESI LIBRARY BUILDING AND AUDITORY USING SNI 1726:2019 and SNI 2847:2019. Tugas Akhir thesis, University Technology Yogyakarta.
Fatkhurrizki, Bayu and Budianto, Johan (2021) EVALUASI DESAIN STRUKTUR BETON BERTULANG BERDASARKAN SNI TAHUN 2019 Studi Kasus Gedung Pusat MAN 2 Kulon Progo EVALUATION OF REINFORCED CONCRETE STRUCTURE DESIGN BASED ON SNI IN 2019 Case Study of Central Building MAN 2 Kulon Progo. Tugas Akhir thesis, University Technology Yogyakarta.
Putra, Rizky Rio Firmansyah and Budianto, Johan (2021) PERANCANGAN ULANG GEDUNG RUMAH SAKIT JIH PURWOKERTO DENGAN MENGGUNAKAN SNI 1726:2019 DAN SNI 2847:2019 REDESIGN OF JIH PURWOKERTO HOSPITAL BUILDING USING SNI 1726:2019 AND SNI 2847:2019. Tugas Akhir thesis, University Technology Yogyakarta.
Apriliyani, Nur Rahma and Budianto, Johan (2021) PERENCANAAN ULANG GEDUNG PERPUSTAKAAN DAN LABORATORIUM TERPADU MA N 2 YOGYAKARTA MENGGUNAKAN SNI 2847 : 2019 REDESIGN OF INTEGRATED LIBRARY AND LABORATORY BUILDING OF MA N 2 YOGYAKARTA USING SNI 2847 : 2019. Tugas Akhir thesis, University Technology Yogyakarta.
Irawan, Didik Nur and Budianto, Johan (2021) REDESAIN MASJID AL-MUSTAQIM MENGGUNAKAN SISTEM STRUKTUR RANGKA BAJA REDESIGN OF AL-MUSTAQIM MOSQUE USING STEEL FRAME STRUCTURE SYSTEM. Tugas Akhir thesis, University Technology Yogyakarta.
Anggoro, Riyan Apriyanto and Budianto, Johan (2021) REDESAIN BANGUNAN GEDUNG TEACHING INDUSTRY LEARNING CENTER (TILC) MENGGUNAKAN RANGKA BAJA KONVENSIONAL (Studi Kasus : Proyek Gedung Sekolah Vokasi Teaching Industry Learning Center (TILC) UGM, Yogyakarta) REDESIGN OF TEACHING INDUSTRY LEARNING CENTER (TILC) BUILDING USING CONVENTIONAL STEEL FRAME (Case Study: Teaching Industry Learning Center (TILC) Vocational School Building Project UGM, Yogyakarta). Tugas Akhir thesis, University Technology Yogyakarta.
Prasetyo, Adi and Budianto, Johan (2021) EVALUASI KINERJA BANGUNAN GEDUNG FAKULTAS KEDOKTERAN UNIVERSITAS SWADAYA GUNUNG JATI DENGAN ANALISIS PUSHOVER MENGGUNAKAN PROGRAM SAP2000 PERFORMANCE EVALUATION OF BUILDING FACULTY OF MEDICINE UNIVERSITY OF GUNUNG JATI WITH PUSHOVER ANALYSIS USING SAP2000 PROGRAM. Tugas Akhir thesis, University Technology Yogyakarta.
Fadlila, Muhammad Rizky and Budianto, Johan (2021) EVALUASI KINERJA STRUKTUR GEDUNG TAHAN GEMPA DENGAN ANALISIS PUSHOVER MENGGUNAKAN PROGRAM SAP2000 EVALUATION OF THE PERFORMANCE OF EARTHQUAKE-RESISTANT BUILDING STRUCTURES WITH PUSHOVER ANALYSIS USING SAP2000 PROGRAM. Tugas Akhir thesis, University Technology Yogyakarta.
Prihambogo1, Yoga and Budianto, Johan (2021) EVALUASI LEVEL KINERJA STRUKTUR GEDUNG TERHADAP GEMPA DENGAN MENGGUNAKAN PUSHOVER ANALYSIS EVALUATION OF BUILDING STRUCTURE PERFORMANCE LEVEL AGAINST EARTHQUAKE USING PUSHOVER ANALYSIS. Tugas Akhir thesis, University Technology Yogyakarta.
Bangsawan, Sulthan Ramadhan and Budianto, Johan (2021) IMPLEMENTASI BUILDING INFORMATION MODELLING (BIM) STUDI KASUS : GEDUNG PARKIR KAMPUS 2 UTY IMPLEMENTATION OF BUILDING INFORMATION MODELING (BIM) CASE STUDY : UTY SECOND CAMPUS PARKING BUILDING. Tugas Akhir thesis, University Technology Yogyakarta.
Sidiq, Ardi and Budianto, Johan (2021) MODIFIKASI PERENCANAAN GEDUNG PELAYANAN DAN AREA PARKIR BBTKLPP YOGYAKARTA MENGGUNAKAN METODE FLAT SLAB DAN SHEARWALL PLANNING MODIFICATIONS OF SERVICE BUILDING AND PARKING AREA BBTKLPP YOGYAKARTA USING FLAT SLAB AND SHEARWALL METHODS. Tugas Akhir thesis, University Technology Yogyakarta.
Pradana, Wisnu Ardi and Budianto, Johan (2021) PENGARUH PEMANFAATAN LIMBAH PLASTIK HD (HIGH DENSITY) SEBAGAI BAHAN TAMBAH PADA PAVING BLOCK DENGAN PRESENTASE 0,7%, 1%, DAN 1,2% PENGUJIAN KUAT TEKAN THE EFFECT OF HD PLASTIC WASTE UTILIZATION (HIGH DENSITY) AS ADDITIONAL INGREDIENTS PAVING BLOCK WITH PRESENTATION 0.7%, 1%, AND 1.2% TESTING PRESSURE POWER. Tugas Akhir thesis, University Technology Yogyakarta.
Lubis, Stevan Agustyas and Budianto, Johan (2021) PENGARUH PEMANFAATAN LIMBAH PLASTIK HD (HIGHT DENSITY) SEBAGAI BAHAN TAMBAH PADA PAVING BLOCK DENGAN PERSENTASE 0.5% , 0,8% , DAN 1,1% PENGUJIAN KUAT TEKAN THE EFFECT OF UTILIZING HD (HIGH DENSITY) PLASTIC WASTE AS ADDITIONAL MATERIAL ON PAVING BLOCK WITH A PERCENTAGE OF 0.5% , 0.8% , AND 1.1% TESTING COMPRESSIVE STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Muhaimin, Ahmad and Budianto, Johan (2021) PENGARUH PEMANFAATAN LIMBAH PLASTIK HD (HIGHT DENSITY) SEBAGAI BAHAN TAMBAH PADA PAVING BLOCK DENGAN PERSENTASE 0.6% , 0,9% , DAN 1,3% PENGUJIAN KUAT TEKAN THE EFFECT OF THE UTILIZATION OF HD (HIGH DENSITY) PLASTIC WASTE AS ADDITIONAL MATERIAL ON PAVING BLOCK WITH A PERCENTAGE OF 0.6% , 0.9% , AND 1.3% TESTING COMPRESSIVE STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Robani, Wahyu and Budianto, Johan (2021) PENGUJIAN KUAT LENTUR KAYU BALOK LAMINASI SENGON DAN MAHONI TESTING THE FLEXURAL STRENGTH OF SENGON AND MAHOGANY LAMINATED BEAMS. Tugas Akhir thesis, University Technology Yogyakarta.
Kapu, Irvan Raynerius and Budianto, Johan (2021) Pemodelan dan Analisis Struktur Gedung Menggunakan Metode BIM (Building Information Modelling) Studi Kasus: Gedung Rusun Prototype-Kota Tegal Modeling and Analysis of Building Structures Using the BIM (Building Information Modeling) Method Case Study: Prototype Flat Building-Kota Tegal. Tugas Akhir thesis, University Technology Yogyakarta.
Rizaldi, La Ode Muh. Reza Pahlasi and Budianto, Johan (2021) RE-DESAIN BANGUNAN TEKNIK SIPIL DENGAN METODE BUILDING INFORMATION MODELING (BIM) Studi Kasus Bangunan Gedung Fakutas Tekik Universitas Tidar Magelang RE-DESIGN OF CIVIL ENGINEERING BUILDING WITH BUILDING INFORMATION MODELING (BIM) METHOD Case Study of Tekik Faculty of Engineering, Tidar University, Magelang. Tugas Akhir thesis, University Technology Yogyakarta.
Meda, Aulia Gervano Junior and Budianto, Johan (2021) REDESIGN STRUKTUR ATAS JEMBATAN MENJADI TYPE WARREN TRUSS WITH VERTICAL MENGGUNAKAN METODE BIM (BUILDING INFORMATION MODELLING) REDESIGN THE STRUCTURE OF THE BRIDGE INTO WARREN TRUSS WITH VERTICAL TYPE USING BIM (BUILDING INFORMATION MODELLING) METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Carlos Methlis Mone, David and Budianto, Johan (2021) PENGARUH PEMANFAATAN LIMBAH BAMBU (FLY ASH) DENGAN PERSENTASE 3,5%, 4%, 4,5% DAN PLASTICIZER SEBAGAI BAHAN TAMBAH TERHADAP KUAT TEKAN BETON THE EFFECT OF UTILIZATION OF BAMBOO WASTE (FLY ASH) WITH A PERCENTAGE OF 3.5%, 4%, 4.5% AND PLASTICIZER AS AN ADDITIONAL MATERIAL ON THE CONCRETE COMPRESSIVE STRENGTH. Tugas Akhir thesis, University of Technology Yogyakarta.
Anggono, Rudi and Budianto, Johan (2021) PENGARUH PEMANFAATAN LIMBAH DAUN JATI SEBAGAI BAHAN TAMBAH PADA PAVING BLOCK DENGAN PERSENTASE 1,5%, 6% DAN 10,5% PENGUJIAN KUAT TEKAN THE EFFECT OF THE UTILIZATION OF TEAK LEAVES AS AN ADDITIONAL MATERIAL IN PAVING BLOCK WITH A PERCENTAGE OF 1.5%, 6% AND 10.5% COMPRESSIVE STRENGTH TEST. Tugas Akhir thesis, University of Technology Yogyakarta.
Angga Kurniawan, Satria and Budianto, Johan (2021) ¬¬PENGARUH PEMANFAATAN LIMBAH DAUN JATI SEBAGAI BAHAN TAMBAH PADA PAVING BLOCK DENGAN PRESENTASE 4,5%, 9% DAN 13,5% PENGUJIAN KUAT TEKAN INFLUENCE OF UTILIZATION OF TEAK LEAVES WASTE AS ADDITIONAL MATERIALS IN PAVING BLOCK WITH PRESENTAGE OF 4.5%, 9% AND 13.5% COMPRESSIVE STRENGTH TEST. Tugas Akhir thesis, University of Technology Yogyakarta.
Arif Setiawan, Ahmad and Budianto, Johan (2021) PENGARUH PENAMBAHAN CANGKANG KEONG (FLY ASH) DENGAN PERSENTASE 4%, 5%, DAN 6% DAN SIKACIM CONCRETE ADDITIVE SEBESAR 0,7% TERHADAP KUAT TEKAN BETON THE EFFECT OF ADDITIONAL 4%, 5% AND 6% CONCRETE SHELLS (FLY ASH) AND A CONCRETE ADDITIVE SIKACIM OF 0.7% ON THE CONCRETE COMPRESSIVE STRENGTH. Tugas Akhir thesis, University of Technology Yogyakarta.
Prasetyo Wibowo, Dedy and Budianto, Johan (2021) REDESAIN STRUKTUR ATAS BETON BERTULANG BERDASARKAN SNI 1726:2012 MENGGUNAKAN PETA GEMPA 2017 Studi Kasus: Gedung Tower B Apartemen Tamansari Cendekia 20 Lantai REDESIGN OF THE STRUCTURE OF REINFORCED CONCRETE BASED ON SNI 1726: 2012 USING MAP 2017 EARTHQUAKE Case Study: Tower B Building of the Tamansari Cendekia Apartment20 Floor. Tugas Akhir thesis, University of Technology Yogyakarta.
Zhafir Pesisir, Muhammad and Budianto, Johan (2021) EVALUASI KINERJA BANGUNAN GEDUNG TERHADAP GAYA GEMPA DENGAN METODE PUSHOVER ANALYSIS (STUDI KASUS: GEDUNG RUANG DOSEN UTY) EVALUATION OF BUILDING PERFORMANCE AGAINST EARTHQUAKE STYLES USING PUSHOVER ANALYSIS METHOD (CASE STUDY: UTY LECTURER'S ROOM BUILDING). Tugas Akhir thesis, University Technology Yogyakarta.
Husen, Teguh Rivai and Budianto, Johan (2021) PEMODELAN DAN ANALISIS STRUKTUR GEDUNG MENGGUNAKAN METODE BIM (BUILDING INFORMATION MODELLING) BUILDING STRUCTURE MODELING AND ANALYSIS USING BIM (BUILDING INFORMATION MODELLING) METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Aswar, Junaidin and Budianto, Johan (2020) EVALUASI KINERJA STRUKTUR GEDUNG BETON BERTULANG METODE PUSHOVER ANALYSIS PERFORMANCE EVALUATION OF REFINED CONCRETE BUILDING STRUCTURES WITH PUSHOVER ANALYSIS METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Setiawan, Irfan and Budianto, Johan (2020) PENGARUH CAMPURAN ABU AMPAS TEBU PADA KONSENTRASI 16%, 20% DAN 24% TERHADAP KUAT TEKAN BETON EFFECT OF MIXED BAGGASE ASH AT 16%, 20% AND 24% CONCENTRATION ON CONCRETE PRESS STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Cahyono, Zulfikar Mahardhika Dwi and Budianto, Johan (2020) PENGARUH CAMPURAN ABU AMPAS TEBU PADA KONSENTRASI 4%, 8% DAN 12% TERHADAP KUAT TEKAN BETON EFFECT OF MIXED ASH CANE BAGGASE AT 4%, 8% AND 12% CONCENTRATION ON CONCRETE PRESS STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Mulandari, Wibyana and Budianto, Johan (2020) PENGARUH CAMPURAN ABU AMPAS TEBU TERHADAP KUAT TEKAN BETON PADA KONSENTRASI 28%, 32% DAN 36% EFFECT OF MIXED BAGGASE ASH ON THE STRENGTH OF CONCRETE PRESS AT 28%, 32% AND 36% CONCENTRATIONS. Tugas Akhir thesis, University Technology Yogyakarta.
Fadhiilah, Fitria Nur and Budianto, Johan (2020) PENGARUH PENAMBAHAN ABU KULIT JAGUNG DENGAN PERSENTASE 1%, 2%, 3% DAN SUPERPLASTICIZER TERHADAP KUAT TEKAN BETON EFFECT OF ADDITION OF CORN SKIN ASH WITH 1%, 2%, 3% PERCENTAGE AND SUPERPLASTICIZER ON CONCRETE COMPRESSIVE STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Lestari, Ratu Ayu and Budianto, Johan (2020) PENGARUH PENAMBAHAN FLY ASH KULIT JAGUNG DAN SUPERPLASTICIZER TERHADAP KUAT TEKAN BETON DENGAN KADAR 7%, 8%, 9% THE EFFECT OF ADDITIONAL CORN SKIN FLY ASH AND SUPERPLASTICIZER ON CONCRETE COMPRESSIVE STRENGTH WITH CONDITION 7%, 8%, 9%. Tugas Akhir thesis, University Technology Yogyakarta.
Hartiasningsih, Nanda Aprilia and Budianto, Johan (2020) PENGARUH PENAMBAHAN FLY ASH KULIT JAGUNG DAN SUPERPLASTICIZER TERHADAP KUAT TEKAN BETON DENGAN KADAR 4%, 5%, 6% EFFECT OF ADDITIONAL CORN SKIN FLY ASH AT 4%, 5%, 6% AND SUPERPLASTICIZER ON CONCRETE COMPRESSIVE STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Djamin, Sudi Tomo and Budianto, Johan (2020) PENGARUH PENAMBAHAN LIMBAH KACA 12%, 15%, DAN 18% TERHADAP KUAT TEKAN BETON EFFECT OF ADDITIONAL 12%, 15% AND 18% GLASS WASTE ON THE STRENGTH OF CONCRETE PRESS. Tugas Akhir thesis, University Technology Yogyakarta.
Masrid, Stefan Scapuisat and Budianto, Johan (2020) PENGARUH PENAMBAHAN LIMBAH KACA 3%, 6%, DAN 9% TERHADAP KUAT TEKAN BETON THE EFFECT OF 3%, 6%, AND 9% GLASS WASTE ADDITION ON THE STRENGTH OF CONCRETE PRESS. Tugas Akhir thesis, University Technology Yogyakarta.
Muhammad, Namus and Budianto, Johan (2020) PENGARUH PENAMBAHAN SERAT ROTAN 0,07% DAN ABU SEKAM 12%, 15%, DAN 18% TERHADAP KUAT TEKAN BETON THE EFFECT OF ADDITIONAL 0.07% RATTAN FIBER AND 12%, 15% AND 18% CHAFF ASH ON THE STRENGTH OF CONCRETE PRESS. Tugas Akhir thesis, University Technology Yogyakarta.
Arifin, Muhammad Nur and Budianto, Johan (2020) PENGARUH PENAMBAHAN SERAT ROTAN 0,7% DAN ABU SEKAM 21%, 24%, 27% TERHADAPKUAT TEKAN BETON EFFECT OF ROTAN FIBER ADDITION OF 0.7% AND CHAFFS OF 21%, 24%, 27% ON THE STRENGTH OF CONCRETE PRESS. Tugas Akhir thesis, University Technology Yogyakarta.
Prianzah, Putra Eko and Budianto, Johan (2020) PENGARUH PENAMBAHAN SERAT ROTAN 0,7% DAN ABU SEKAM 3%, 6%, 9% TERHADAP KUAT TEKAN BETON EFFECT OF ROTAN FIBER ADDITION OF 0.7% AND CHAFFS OF 3%, 6%, 9% ON CONCRETE PRESS STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Grevisanto, Arga Fady and Budianto, Johan (2020) ANALISIS PENGARUH PENAMBAHAN POZZOLAN LUMPUR LAPINDO TERHADAP KUAT GESER MORTAR PASANGAN BATU BATA ANALYSIS OF THE EFFECT OF LAPINDO MUD POZZOLAN ADDITION ON THE SHEAR STRENGTH OF MORTAR. Tugas Akhir thesis, University Technology Yogyakarta.
Rizaldi, Ichsan and Budianto, Johan (2020) EFISENSI RENCANA ANGGARAN BIAYA DAN PERBANDINGAN KEKUATAN STRUKTUR DARI REDESIGN BANGUNAN JOGJA APARTEMENT TANPA DROP PANEL PADA TIPE STRUKTUR RANGKA PEMIKUL MOMEN KHUSUS EFFICIENCY OF THE BUDGET PLAN AND COMPARISON OF STRUCTURAL STRENGTH FROM REDESIGN OF JOGJA APARTEMENT BUILDING WITHOUT DROP PANEL ON TYPE OF SPECIAL MOMENT RESISTING FRAME STRUCTURE. Tugas Akhir thesis, University Technology Yogyakarta.
Wibowo, Agung and Budianto, Johan (2020) EVALUASI KINERJA SEISMIK STRUKTUR DALAM PEMAKAIAN CORE WALL PADA BANGUNAN APARTMENT MENGGUNAKAN PUSHOVER ANALYSIS (StudiKasus: Proyek Pembangunan Apartment Trans Park Bintaro) EVALUATION OF STRUCTURAL SEISMIC PERFORMANCE IN THE USE OF CORE WALL IN APARTMENT BUILDING USING PUSHOVER ANALYSIS (Case Study: Apartment Development Project Trans Park Bintaro). Tugas Akhir thesis, University Technology Yogyakarta.
Bukhori, Ridwan and Budianto, Johan (2020) EVALUASI KINERJA STRUKTUR GEDUNG PELAYANAN RSUD TIDAR KOTA MAGELANG METODE PUSHOVER ANALYSIS EVALUATION OF STRUCTURAL PERFORMANCE OF TIDAR REGIONAL GENERAL HOSPITAL SERVICE BUILDING , MAGELANG USING PUSHOVER METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Hendiawan, Adhi Surya and Budianto, Johan (2020) REDESIGN STRUKTUR ATAS BETON BERTULANG BERDASARKAN SNI 1726:2012 MENGGUNAKAN PETA GEMPA 2017 StudiKasus: GedungKampus III InstitutSains&Teknologi “Akprind” Yogyakarta REDESIGNING STRUCTURE OF REINFORCED CONCRETE BASED ON SNI 1726: 2012 USING THE 2017 EARTHQUAKE MAP Case Study: Campus Building III "Akprind" Institute of Science & Technology Yogyakarta. Tugas Akhir thesis, University Technology Yogyakarta.
Hasani, Abdus Syukur and Budianto, Johan (2020) STUDI EKSPERIMENTAL PENGARUH PENAMBAHAN RESIN POLYESTER DENGAN KADAR 1%, 2%, DAN 3% TERHADAP KUAT TEKAN BETON EXPERIMENTAL STUDY ON THE EFFECT OF ADDITION OF POLYESTER RESINS WITH 1%, 2%, AND 3% LEVELS ON THE COMPRESSIVE STRENGTH OF CONCRETE. Tugas Akhir thesis, University Technology Yogyakarta.
Aji, Bayu Bimo and Budianto, Johan (2020) STUDI EKSPERIMENTAL PENGARUH PENAMBAHAN RESIN POLYESTER DENGAN KADAR 10%, 11%, DAN 12% TERHADAP KUAT TEKAN BETON EXPERIMENTAL STUDY ON THE EFFECT OF ADDITION OF POLYESTER RESINS WITH LEVELS OF 10%, 11%, AND 12% AGAINST CONCRETE COMPRESSIVE STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Durohman, Imtad and Budianto, Johan (2020) STUDI EKSPERIMENTAL PENGARUH PENAMBAHAN RESIN POLYESTER DENGAN KADAR 4%, 5%, DAN 6% TERHADAP KUAT TEKAN BETON EXPERIMENTAL STUDY ON THE EFFECT OF ADDITION OF POLYESTER RESINS WITH 4%, 5%, AND 6% LEVELS TO THE COMPRESSIVE STRENGTH OF CONCRETE. Tugas Akhir thesis, University Technology Yogyakarta.
Chuzaeni, Chuzaeni and Budianto, Johan (2020) STUDI EKSPERIMENTAL PENGARUH PENAMBAHAN RESIN POLYESTER DENGAN KADAR 7%, 8%, DAN 9% TERHADAP KUAT TEKAN BETON EXPERIMENTAL STUDY ON THE EFFECT OF ADDITION OF POLYESTER RESINS WITH LEVELS OF 7%,8%, AND 9% AGAINST CONCRETE COMPRESSIVE STRENGTH. Tugas Akhir thesis, University Technology Yogyakarta.
Wiratama, Ridwan Yoga and Budianto, Johan (2019) ANALISIS PENGARUH KUAT TEKAN BETON DENGAN BAHAN TAMBAHAN LIMBAH LAS KARBIT DENGAN PRESENTASE 1%, 2%, 3% DAN MENGGANTI 1% KEBUTUHAN AIR BETON DENGAN SUPERPLASTICIZER ANALYSIS OF THE EFFECT OF CONCRETE PRESSURE WITH ADDITIONAL CARBIT WASTE WITH PRESENTAGE OF 1%, 2%, 3% AND REPLACING 1% NEEDS OF CONCRETE WATER WITH SUPERPLASTICIZER. Tugas Akhir thesis, University Technology Yogyakarta.
Purwanto, Dwi and Budianto, Johan (2019) ANALISIS PENGARUH KUAT TEKAN BETON DENGAN BAHAN TAMBAHAN LIMBAH LAS KARBIT DENGAN PRESENTASE 4%, 5%, 6% DAN MENGGANTI 1% KEBUTUHAN AIR BETON DENGAN SUPERPLASTICIZER ANALYSIS OF THE EFFECT OF CONCRETE COMPRESSIVE STRENGTH WITH ADDITIONAL CARBIT WASTE WITH PRESENTAGE OF 4%, 5%, 6% AND REPLACING 1% NEED OF CONCRETE WATER WITH SUPERPLASTICIZER. Tugas Akhir thesis, University Technology Yogyakarta.
Astutik, Dwi Retno and Budianto, Johan (2019) Comparison of Apartment Planning Based on SNI 1726-2012 Using the 2010 and 2017 Earthquake Maps Case Study of Mataram City (Yudistira Apartment) 19 Stories, Palagan Street, Sleman, the Special Region of Yogyakarta Comparison of Apartment Planning Based on SNI 1726-2012 Using the 2010 and 2017 Earthquake Maps Case Study of Mataram City (Yudistira Apartment) 19 Stories, Palagan Street, Sleman, the Special Region of Yogyakarta. Tugas Akhir thesis, University Technology Yogyakarta.
Warsono, Warsono and Budianto, Johan (2019) EVALUASI KINERJA GEDUNG TERHADAP GAYA GEMPA DENGAN METODE PUSHOVER ANALYSIS Studi Kasus: Pembangunan Gedung Hotel Dan Apartement Gunawangsa Tower A, Gresik, Jawa Timur EVALUATION OF BUILDING PERFORMANCE ON EARTHQUAKE STYLE USING PUSHOVER ANALYSIS METHOD Case Study: Construction of the Hotel And Apartment Building Gunawangsa Tower A, Gresik, East Java. Tugas Akhir thesis, University Technology Yogyakarta.
Awalukitiswara, Awalukitiswara and Budianto, Johan (2019) PEMETAAN TOPOGRAFI MENGGUNAKAN APLIKASI ANDROID “MOBILE TOPOGRAPHER” SEBAGAI ACUAN PENCARIAN KOORDINAT AWAL Studi Kasus: Pengukuran Lahan Di Kalasan, Sleman TOPOGRAPHIC MAPPING USING ANDROID APPLICATION "MOBILE TOPOGRAPHER" AS A REFERENCE OF SEARCHING FOR EARLY COORDINATES Case Study: Land Measurement in Kalasan, Sleman. Tugas Akhir thesis, University Technology Yogyakarta.
Nugroho, Deni Cahyo and Budianto, Johan (2019) PENERAPAN VALUE ENGINEERING TERHADAP STRUKTUR ATAS PADA PERLUASAN GEDUNG KANTOR BPK PERWAKILAN KALIMANTAN BARAT APPLICATION OF VALUE ENGINEERING ON THE STRUCTURE OF THE EXTENSION OF BPK OFFICE KALIMANTAN BARAT. Tugas Akhir thesis, University Technology Yogyakarta.
Cahyono, Dedi and Budianto, Johan (2019) PENGARUH PEMANFAATAN LIMBAH MARMER SEBAGAI SUBTITUSI SEMEN PADA CAMPURAN PAVING BLOCK DENGAN PRESENTASE 3%, 8% dan 12% PENGUJIAN KUAT TEKAN DAN PENYERAPAN AIR THE EFFECT OF UTILIZATION OF MARBLE WASTE AS SUBTITUTION OF CEMENT IN MIXED PAVING BLOCK WITH 3%, 8% and 12% PERCENTAGE TESTING COMPRESSIVE STRENGTH AND ABSORPTION OF WATER. Tugas Akhir thesis, University Technology Yogyakarta.
Shidiq, Gumilang Yuniar and Budianto, Johan (2019) PENGARUH PEMANFAATAN LIMBAH MARMER SEBAGAI SUBTITUSI SEMEN PADA PAVING BLOCK DENGAN PROSENTASE 5%, 10% DAN 15% PENGUJIAN KUAT TEKAN DAN PENYERAPAN AIR THE EFFECT OF UTILIZATION OF MARBLE WASTE AS SUBTITUTION OF CEMENT IN PAVING BLOCK WITH PROCENTAGE OF 5%, 10% AND 15% TESTING STRONG PRESSURE AND ABSORPTION OF WATER. Tugas Akhir thesis, University Technology Yogyakarta.
Bashori, Ikrom and Budianto, Johan (2019) EVALUASI KINERJA SEISMIK STRUKTUR BANGUNAN GEDUNG BERTINGKAT MENGGUNAKAN PUSHOVER ANALYSIS DENGANCAPACITY SPECTRUM METHOD. Tugas Akhir thesis, University Technology Yogyakarta.
Iryandi, Rizky Dwi and Budianto, Johan (2019) EVALUASI KINERJA SEISMIK STRUKTUR BETON DENGAN ANALISIS PUSHOVER MENGGUNAKAN PROGRAM SAP2000 PADA GEDUNG RUMAH SAKIT PKU MUHAMMADIYAH TEGAL. Tugas Akhir thesis, University Technology Yogyakarta.
Budiardi, Oktova and Budianto, Johan (2019) PENGARUH PENAMBAHAN LIMBAH BETON DAN ABU SEKAM PADI TERHADAP NILAI KUAT TEKAN BETON VARIASI 5%, 10%, 15%. Tugas Akhir thesis, University Technology Yogyakarta.
Haydanu, Elgusti and Budianto, Johan (2018) ANALISIS PADA PEMBANGUNAN PEKERJAAN PENGERASAN BETON LANTAI STABLING DI STASIUN DAO PADA DAOP 1 JAKARTA BERDASARKAN TAHAPAN KINERJA WAKTU DENGAN MENGGUNAKAN MICROSOFT PROJECT ANALYSIS IN THE DEVELOPMENT OF THE WORK ON THE STABLING CONCRETE HARDENING FLOOR AT DAO STATION IN DAOP 1 JAKARTA BASED ON THE PHASES PERFORMANCE TIME WITH USING MICROSOFT PROJECT. Tugas Akhir thesis, University of Technology Yogyakarta.
Iryandi, Rizky Dwi and Budianto, Johan (2018) EVALUASI KINERJA SEISMIK STRUKTUR BETON DENGAN ANALISIS PUSHOVER MENGGUNAKAN PROGRAM SAP2000 PADA GEDUNG RUMAH SAKIT PKU MUHAMMADIYAH TEGAL EVALUATION OF CONCRETE STRUCTURE SEISMIC REACTION WITH PUSHOVER ANALYSIS USING SAP2000 PROGRAM ON HOSPITAL BUILDINGS PKU MUHAMMADIYAH TEGAL. Tugas Akhir thesis, University of Technology Yogyakarta.
Aprilyono, Rizky Fajar and Budianto, Johan (2018) PENGARUH PENAMBAHAN LIMBAH BETON DAN ABU SEKAM PADI TERHADAP NILAI KUAT TEKAN BETON VARIASI 20%, 25%, 30% THE EFFECT OF CONCRETE WASTE AND RICE HUSK ASH ADDITION ON CONCRETE STRENGTH AT 20%, 25%, 30% VARIATIONS. Tugas Akhir thesis, University of Technology Yogyakarta.
Ardinal, Kiky and Budianto, Johan (2018) PENGGUNAAN APLIKASI MICROSOFT PROJECT SEBAGAI ANALISIS PENJADWALAN ULANG UNTUK MENEKAN BIAYA AKIBAT KETERLAMBATAN PEKERJAAN PROYEK (Studi kasus: Proyek Pembangunan Pasar Prambanan Tahap II) USE OF MS. PROJECT APPLICATION AS RESCHEDULING ANALYSIS TO REDUCE COSTS DUE TO PROJECT WORK DELAY (Case Study of Prambanan Development Project Phase II). Tugas Akhir thesis, University of Technology Yogyakarta.
